Nr.

Description 

6A.

Inboard engine VETUS Mitsubishi M2.C5, 11 hp, 2 cylinders, MP 10 panel, solid propeller, battery charging separator, plastic fuel tank 25 l - without fuel level gauge. Complete equipment with fitting, (no bracket for fixing outboard engine)

6C.

Inboard engine VETUS Mitsubishi M2.06, 16 hp, 2 cylinders, MP 22 panel, solid propeller, battery charging separator, plastic fuel tank 25 l - without fuel level gauge. Complete equipment with fitting, (no bracket for fixing outboard engine)

6D.

Inboard engine VETUS Mitsubishi M3.09, 25 hp, 3 cylinders, MP 22 panel, solid propeller, battery charging separator, plastic fuel tank 25 l - without fuel level gauge. Complete equipment with fitting, (no bracket for fixing outboard engine)

6. D1-13

Inboard engine VOLVO D1-13, 12 hp, 2 cylinders, panel, solid propeller, plastic fuel tank 25 l - without fuel level gauge, battery charging separator for 2 batteries. Complete equipment with fitting, (no bracket for fixing outboard engine)

6. D1-20

Inboard engine VOLVO D1-20, 19 hp, 3 cylinders, panel, solid propeller, plastic fuel tank 25 l - without fuel level gauge, battery charging separator for 2 batteries Complete equipment with fitting, (no bracket for fixing outboard engine)

6E.

Folding propeller GORI – two blades. Additional payment

7A.

Inboard engine NANNI N2.10, 10 hp, N2.10, 2 cylinders, based on Kubota, ECO panel, solid propeller, plastic fuel tank 25 l - without fuel level gauge, battery charging separator for 2 batteries, (no bracket for fixing outboard engine)

7C.

Inboard engine NANNI N2.14, 14 hp, 2 cylinders, based on Kubota, A3 panel, solid propeller, plastic fuel tank 25 l - without fuel level gauge, battery charging separator for 2 batteries, (no bracket for fixing outboard engine)

7D.

Inboard engine NANNI N3.21, 21 hp, 3 cylinders, based on Kubota, A3 panel, solid propeller, plastic fuel tank 25 l - without fuel level gauge, battery charging separator for 2 batteries, (no bracket for fixing outboard engine)

8.

Electric engine

10/1.

Rebuilding the interior for mounting the inside helmsman position – movable and folding helmsman chair, sliding console, hydraulic system of rudder steering, steering wheel and mechanical engine steering

29B.

Plastic fuel tank 42 l – with complete equipment (without fuel level gauge) - instead of 25 l plastic tank. Additional payment

29D.

Fuel level gauge

30.

Stainless steel fuel tank 60 l - complete equipment (with the fuel level gauge) - instead of 25 l plastic tank. Additional payment

Nr.

Description 

9.

Tiller extension - Ronstan 610 mm

13/1.

Interior furnishing - mahogany.  Additional payment to standard

13/2.

Interior furnishing - cherry wood.  Additional payment to the standard

14S.

2 Portholes - Moonlight 304 x 155mm with mosquito net on the low roof extension

15.

Two - burner spirit cooker ORIGO 4100 with installing in the galley plate.  Additional payment to standard

17.

Two - burner spirit cooker ORIGO 3000 on Cardan joint with installing in the galley niche.  Additional payment to the standard

19/1.

Cooker - WALLAS 85 DU - with the plate heating the interior. Additional payment to the standard

19/2.

Cooker - WALLAS 85 DU. Additional payment to the standard

21.

Additional flexible tank for drinking water (Plastimo 50 L) with sink installation system

22.

Flexible tank for waste water (Vetus 50 L) with installation system

25/1.

Shower: water installation (cold water) – automatic pump of waste water with floating switch-key, pulled out shower handle, without water heating installation

25/2.

Shower in the cockpit – without water heating installation

26.

Device for heating the water WEBASTO THERMO TOP C with distribution installation – hot water in the galley and WC cabin

27.

Interior heating and water heating WEBASTO THERMO TOP C with distribution installation - hot water in the galley and WC cabin

28.

Interior heating (without water heating) WEBASTO AIR TOP 2000 with distribution Installation

32.

Stay turnbuckles “Ronstan“– fast operation. Additional payment to the standard

33/1.

Reefing foresail roller – PROFURL 26 – complete equipment

33/2.

Reefing foresail roller – PROFURL B 29S – complete equipment

35.

Quick reefing of the mainsail for 2 reefs, 2 reef lines, 2 stoppers - operated from the mast

37.

Guard rail: double line. Additional payment

38.

Guard rail - single line: side semi - pulpits + belts in the cockpit. Additional payment

39.

Guard rail - double line: side semi - pulpits + belts in the cockpit. Additional payment

40.

Companionway on hinges. Additional payment to standard companionway

42/1.

Bow ladder – folding, possibility of disassembling – stainless, stainless steel steps

42/2.

Bow ladder – folding, possibility of disassembling – stainless, teak steps

45.

Stainless steel curtain rails with curtains

46.

Two double baskets for fenders Æ 160 - on the bow counter

48.

Mainsail cover

51.

Positional lights meeting the requirements of BSH. Additional payment

52/1.

Ballast: 170 kg – possibility of taking lead blocks out + 170 kg – permanent ballast. Additional payment to the standard

53.

Protection against osmosis VC TAR2 (4 layers) and antifouling VC 17m (2 layers)  – from International

55.

Autopilot ST 1000 + “Raymarine” with remote “Smart Control”

56.

Bidata ST 40 “Raymarine” log and echo sounder

57.

Chartplotter Raychart 435 “Raymarine”

59.

Car radio with CD player - Pioneer with MP3 player with two Pioneer speakers

60.

Additional electric distribution board: 8 Philippi STV 108 circuits, 8 automatic fuses

61.

Light dimmer, maximum 6 halogen lights

64.

Cockpit lighting under the roof of the cabin – 2 halogen water tight lamps Aqua Signal

67.

Compass Plastimo PLA 31341 – with the light

68.

“Drawer-type” Refrigerator “Isotherm” CRUISE 36 (36 l) – assembly in the place where the wardrobe in the mess is, on port side 

72.

Charging from the land – with electronic charger WAECO 915-012TB (15 A), with circuit breaker F1 and 230V socket in the cabin

73/1.

Solar battery SOL 1001 60W. 590x450x2. Location: on the front of the roof, on starboard, between hand rail and the slide way of the hatch cover

73/2.

Solar battery SOL 1002 120W. 590x450x2. Location: front part of the roof between the slide ways of the hatch cover

76.

Additional shelves in the cockpit – 2 pieces

77.

Putting the yacht in order on delivery, launching exclusive of the hoisting crane

78.

Transport (per km)

79.

Insurance of transport

80.

Fender rope with stainless steel hardware, assuming that item 83/2 is ordered

81.

Teak floor in the cockpit

82.

Teak seats in the cockpit

83/2.

Rubrail – teak.  Additional payment

84.

Teak under the winches

85/1.

Teak on the main deck

85/2.

Teak on the roof of the low superstructure

86.

Side deck teak

87.

Mast in some other color. Additional payment to the standard.

94.

Cushions for the seats in the cockpit

99.

Hull in dark green or navy blue, deck – cream. Additional payment to the standard

100.

Sails in brown or cream color.  Additional payment to the standard

101.

Boards on the sides made of oak battens.  Additional payment

102/1.

Sea toilet: electric pump, stainless dirty water tank – 55 l, WASTE connector for emptying the tank in the marina

102/2.

Sea toilet: electric pump, stainless dirty water tank – 55 l, WASTE connector for emptying the tank in the marina and pump with the seacock for emptying the tank on open sea

105.

Folding table – extension of galley plate

107.

Stern stainless steel anchor with drum with 50 m anchor belt – mounted on stern counter

108.

Bow anchor platform with anchor Bruce type, 5m stainless steel chain and 30m of anchor line

109.

Bow counter with low and wide pass (movable seat on the bow) and bow anchor platform with anchor. Additional payment to the standard bow counter

111/1.

Table in cockpit – table adapted from the cabin

113.

Radar reflector

116.

Hardened glued glass windows instead of plexi windows

117.

1 Electric wiper

118.

Teak grating in aft part of the cockpit (if inboard engine is ordered)

119.

Horn

200/1.

Rotating profiled laminated stern centerboards – 2 pieces. Placed on the transom. Operated from cockpit

201.

1 Forward centerboard made of stainless steel, placed under the bunk level in the forepeak. Operated from the cockpit

203.

Additional large genoa on the forestay on the bowsprit for winds up to 4 B. Halyard on the stopper, sheets, additional travelers. HABER 660 cutter – ca. 12 m2 ,  HABER 800 cutter – ca. 22 m2

204.

Full battens for  the main sail: HABER 660 gaff sloop – 2 long battens on the down part of the sail, HABER 800 gaff cutter – 3 long battens on the down part of the sail

205.

Triangular storm main sail with short battens, reaching to the top of mast. HABER 660 – ca. 6 m²  , one reef. HABER 800 – ca. 10 m², two reefs

206.

Additional short stay and short shrouds, shroud plates, short stay and shrouds fixed on the mast. Steel tender wire 7x19. Stay and shrouds can be detached and fixed on the mast. Use: additional strengthening of rigging for sailing in heavy marine conditions and possibility of setting storm jib (surface ca. 3,5 m²  or 1,5 m²) on slides

207.

Storm jib – area ca. 3,5 m²

208.

Cover for foresail  (HABER 660 - genoa 9 m²  ) on stay, set with the help of additional halyard

210.

Main sail and storm jib halyard, downhaul of main sail  and two reefs - operated from the cockpit. System of directional pulleys, stoppers, open reels for guiding the rope back onto the winches. Two-gear self-tailing winches instead of standard winches

211.

2 telescopic booms for genoa

212.

Bowsprit

213.

Bowsprit with zinc anchor